| ·

Poly Motor-Jaw
The PackRite Poly Motor-Jaw Sealer is a
versatile motorized heat sealing machine that provides either continuous automatic or
intermittent stop/start cycling with the flip of a switch. In the automatic mode, up to 30
packages per minute can be sealed. In the intermittent mode, the machine can be controlled
by foot-pedal stop/start cycling.
In both modes, dwell time and pressure are machine
controlled for uniformity, so theres no guesswork. On machines without adjustable
dwell, the only adjustment required is to the thermostat, which can be set at any sealing
temperature up to 550~F. The heated upper jaw and unheated lower jaw are both covered with
a bar cover to assure instant seal release.
Because its motorized, sealing action of the Poly
Motor-Jaw is fast, easy and efficient. The machine comes with seal widths of 1/8"
(for 2 mil and under material), or 3/8. The integrity of the flat seal itself is
actually stronger than the material being sealed.
The machine accommodates a variety of unsupported films
of 3 mils and under thickness. With the optional dwell, the sealer can handle thickness of
3 mils up to 6 mils.
The compact size of the Poly Motor-Jaw Sealer allows it
to fit in a bench space of just 7" x 7-1/4". With jaws open, it is only 10
high. It can be mounted flat or at an optional 30~ incline.

Thermo Motor-Jaw Sealer
The PackRite Thermo Motor-Jaw Sealer is
a versatile motorized heat sealing machine that provides either continuous automatic or
intermittent stop/start cycling with the flip of a switch. In the automatic mode, up to 30
packages per minute can he sealed. In the intermittent mode, the machine can he controlled
by foot-pedal stop start cycling.
In both modes, dwell time and pressure are
machine-controlled for all materials, so theres no guesswork. With the exception of
the optional adjustable dwell, the only adjustment required is the thermostat, which can
he set at any sealing temperature up to 550~F.
Sealing action of the Thermo Motor-Jaw is fast, easy
and efficient. The integrity of the seal itself is airtight. A choice of three sealing
impressions is standard flat seal, vertical crimp and horizontal crimp.
The machine accommodates a wide variety of
thermoplastic materials, including cellophane, polycel, Kraft and scrim-hacked laminates,
overlap labels, plus many foils and MIL Spec materials.
The compact size of this PackRite sealer allows it to
fit in a small space of just 7" x 11-1/2". With jaws open, it is only
11-1/4 high.

PackRite Robot Air-Operated Jaw Sealer
The PackRite Robot Air-Operated Jaw
Sealer is a pneumatic-powered heat sealer that is available in two models. The Model RTP
was developed for lab use and is ideal for medical applications. The machine seals Medical
Pouches (TyvecTM/poly), Polyethylene foils and Dust cover without changing any
sealing variables or controls and matches pouch manufacturers seals. The Model RTP meets
FDA standards for recordability of temperature, pressure and dwell. The Model R is ideal
for Mil Spec materials, MylarTM*, foils, cellophane, krafts and polypropylene.
The sealing operation begins when
the electric foot-switch is depressed. A movable jaw then closes for a preset period of
time at a controlled pressure and temperature. The result high quality and uniform seals of superior integrity |